• Brake Cleaner
• Burner Cleaner
• Cleaner Spray S
• Compressed-Air Spray
• Electro Contact Cleaner
• Mould Cleaner
• Multi Foam
• Plastic Cleaner
• Sealant & Adhesive Remover
• Surface Cleaner
• TFT/LCD Screen-Cleaner
• Visor Cleaner

WEICON Surface Cleaner

For the preparation of parts to be bonded

For cleaning and degreasing surfaces to be joined or sealed with WEICON adhesives and sealants. This cleaner can be applied on materials like metal, glass, ceramic and most plastics*.

Only grease-free and clean surfaces guarantee both good adhesion and reliable curing of the adhesive. Evaporates without leaving residues.

Areas of application:

• Cleaning and degreasing of surfaces as preparation before bonding with WEICON adhesives
• Cleaning and degreasing of machine parts during service works

Instructions for use:

Spray WEICON Surface Cleaner onto the parts to be cleaned. Use a clean cloth or nonwoven fabric to wipe off wet residues making sure that impurity and solvent remainders are removed. Repeat the cleaning process if necessary. Let the solvents evaporate until the surfaces have dried. Apply WEICON adhesives according to the instructions of use and join the parts.

Packaging:

400 ml spray can, Art.-No.: 11207400

>> Brochure/ Technical data
>> EC Safety data sheets (Overview)

* Check surface compatibility prior to use.

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.