• Alu Grinding Protection
• Chewing Gum Remover
• Label Remover
• Mould Release Agent
• Rust Loosener & Contact Spray
• Rust-Shock
• Welding Protection Spray

WEICON Welding Protection Spray

WEICON Welding Protection Spray* (silicone-free) is used to clean welding nozzles and to keep them clean. At the same time, it protects the work piece to be welded against the effect of weld splashes without impairing the welding seam.

Applications:

• Prevents the adhesion of welding splashes on gas jets and work piece surfaces
• Offers full-surface protection during the welding procedure
• Postwork cleaning of the work pieces with spatula, brush, or chisel is not necessary
• Posttreatment of word pieces like: Bronzing, galvanising, anodising, or painting is possible without special cleaning. Excess residues of the sprayed-on product should be removed with e.g. WEICON Cleaner Spray S)

* Tested by the Schweiß-Fach-Lehranstalt (Welding Institute) in Hannover/Germany.

>> Brochure/ Technical data "Technical Sprays"
>> EC Safety data sheet

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.