• WEICON A
• WEICON B
• WEICON BR
• WEIDLING C
• WEICON F
• WEICON F2
• WEICON SF
• WEICON ST
• WEICON TI
• WEICON UW
• WEICON WR
• WEICON WR2
• WEICON Ceramic BL
• WEICON Ceramic W
• WEICON HB 300
• WEICON Casting Resin MS 1000
• WEICON Flex Hardener

WEICON Plastic Metal WR

liquid, steel-filled, wear resistant, temperature resistant from -35°C up to +120°C

This pourable wear-resistant type is used in mould making and wherever metal parts are subject to high wear caused by friction, e.g.:

• for repairing and build-up of shafts
• for pouring out bearings, cutting and punching tools
• for making casting and profile milling models as well as drawing moulds
• for pouring under machines and foundations
• and as a wear-resistant under-coating before coating with WEICON Ceramic BL

WEICON Plastic Metal WR transforms to a hard and wear-resistant surface with good sliding properties.

>> Brochure/ Technical data "Plastic Metal"
>> EC Safety data sheets (Overview)

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.